HM32 Mill Drill Hafco Metalmaster M121

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=WdOJBV4euS0

http://www.machineryhouse.com.au/M121 • HM-32 - Mill Drill - Belt Drive (240V) • Description • This is a rugged and well made machine with good capacities and plenty of power, a good choice for a serious home engineer. • The belt driven head provides a useful range of 12 speeds, 100-2150rpm and is quiet in operation, the head can be re-positioned on the column with the aid of a handle driven rack and pinion drive. • The table has T slots to allow the work to be directly mounting to table, or in a milling vice, with two large diameter control hand wheels with metric calibrations for the longitudinal axis. • The fine down feed control can be locked firmly in position when milling and the mill also features an easy-to-read depth stop. • Optional power feed provides smooth variable speed drive to longitudinal travel • Features • Quiet B section belt drive system • Milling head rotates 360º on column • Extra large 820 x 240mm ground work table with T-slots • Adjustable leadscrew nuts eliminating backlash on both axis • Fine feed hand wheel operating quill feed • Forward and reverse on/off switch with emergency stop • 3MT spindle with 75mm diameter quill • Adjustable table and drill length stops • Rack and pinion wind-up head • Rear slide-way cover and slide clamps on all axis • Spindle lock for quill • Table locks on both axis • Metric dial graduations @ 0.05mm for X Y axis • Optional power feed fits straight on the table • Includes • Drill chuck • 3MT arbor • 3MT-2MT drill sleeve • Face cutter arbor • 3 tilting vice • Safety cutter guard • ORDER CODE: M121 • Model: HM-32 • Digital Readout: Optional • Type: Vertical • Table Size: 820 x 240mm • Column Type: Ø115mm • Spindle Taper - Vertical: 3MT • Longitudinal Travel (X-Axis): 540mm • Cross Travel (Y-Axis): 190mm • Vertical Travel (Z-Axis): 410mm • Type of Slides: Dovetail • Spindle to Table: 455mm • Quill Travel / Diameter: 130mm / 75mm • Throat Depth (max.): 202mm • Tilting Head (Left ~ Right): Fixed • Tilting Head (Forward ~ Back): Fixed • Drilling Capacity: 31.5mm • End Milling Capacity: 22mm • Face Milling Capacity: 80mm • Power Feed - Longitudinal (X-Axis): Optional • Table T-Slot Size: 14mm • Work Table Load Capacity: 50kg • Spindle Speeds Vertical (steps/rpm): 12 (100-2150rpm) • Motor Power - Vertical: 1.5kW / 2hp • Motor Voltage: 240V • Overall Height: 1100mm • Weight (nett): 295kg • • For more information on this machine, please visit: • Hare and Forbes Machineryhouse • Sydney: (02) 9890 9111 • Melbourne: (03) 9212 4422 • Brisbane: (07) 3715 2200 • Perth: (08) 9373 9999 • http://www.machineryhouse.com.au/M121 • Machineryhouse - NZ • Auckland: (09) 2717 234 • http://www.machineryhouse.co.nz/M121

#############################

New on site