How to Install a FLEXDrain Drainage Pipe System

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=XZrCVLM8b7w

FLEX-Drain experts show you how to install a FLEX-Drain drainage pipe system and how to replace an old french drain with step by step instructions. Install FLEX-drain performance expandable rain pipe system that expands and contracts to any shape. • Diagnosing the problem in your drainage system is the first and most important issue before installing the FLEX-drain. Most downspouts cause erosion in the ground and can damage a homes foundation. Next, prepare for the installation of the drain by measuring out how much pipe you will need. Using a trench digger, dig the trench that the pipe will sit in. The trenches should be about 8 deep. Once the trench digger has ran its course, remove any loose dirt so you can remove high spots. • Connect the downspout adapter to your downspout, then lay the FLEX-pipe in the trench. Snap the flexible T pipe to the all pipes so that the water flows into the ditch. To finish the pipe, install an end cap for a nice clean finish. Back fill the pipe with gravel and then cover with dirt and grass seed. Shop FLEX-Drain drainage pipe parts at http://www.Lowes.com/Plumbing • Watch more how to videos at http://www.Lowes.com/Videos • Subscribe to Lowe's YouTube for great how to videos and home improvement tips: http://www.youtube.com/subscription_c... • Or head to our channel: / lowes

#############################

New on site