Arduino Pro Micro Microcontroller Development Board

YOUR LINK HERE:

http://youtube.com/watch?v=Y4TJQUZPSFk

This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like. • There is a voltage regulator on board, so it can accept up to 12V DC. • The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. • It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. • The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. • If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits. • Features : • ATMEGA32U4 running in 5V / 16MHz • Support Arduino IDE V1.0.1 • Micro USB interface programming on the board • Four 10-bit ADC pin • 12 digital I / O (5 PWM capability) • Rx and Tx hardware serial connection. • @MG Production @theworldnews @mgproduction • WEBSITE - https://mohitgajera.com • FACEBOOK - / mohit.gajera007 • TWITTER - / mohitgajera • INSTAGRAM - / mohitgajera1 • COPYRIGHT @MG Production © ® • COPYRIGHT @THE TECH LAB © ® • COPYRIGHT @🌎THE WORLD NEWS 🌎 © ®

#############################

New on site