E000191 in Canon IR3300 Error Solution Part 1

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Ylu3bxhHRhA

Solution of E-191 in Canon IR3300 • I have face this problem in my machine IR3300 then i have solve elaborate in present video. • Part 2 link : • Part 2 : E-000191 in Canon IR3300 Sol... • E191 code indicates a communication error / fault has occurred b/w the DC Control PCB the HVT unit on the Composite Power Supply. • Check all of the connections for the DC Controller PCB the Composite Power Supply. • Make sure the wire harness b/w the DC Controller PCB the Composite Power Supply is good by performing continuity checks (including crosschecks checking for a pinched wire to ground for each wire) visually inspecting it. • Make sure the wall voltage is correct (neutral to ground should be less than 1 volt). • Finally, try replacing the DC Controller PCB or the Composite Power Supply. • Any idea or suggestions give in comment • Email: [email protected]

#############################

New on site