AC Grounding Basics Grounding Series Part 4

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Z8xUCIazWmA

AC Grounding (low voltage systems 50-1000VAC) • NEC states that electrical systems be grounded to a point that the max voltage to ground, on undergrounded conductors does not exceed 150 volts • Any 3 phase, 4 wire, Y configurations and delta configurations need to have the neutral wire grounded • A bonding conductor is needed for sue between the grounded conductor (or neutral wire) and the equipment-grounding conductor the the metallic enclosure of the main electrical service • Ensure proper conductor size if used for ground • Grounding in a separately derived AC system • Important to ensure that the grounding conductor (or neutral wire) IS bonded to equipment grounding conductor of the metallic chassis on the load side • When continuity is NOT being interrupted on the load side, it is critical to ensure that there is NO bond between the neutral wire (or grounding conductor) and the metallic chassis of the electrical service • Get the FULL video transcript here: https://www.rspsupply.com/education/a... • Want to see similar products to those featured in this video: https://www.rspsupply.com/c-2494-elec... • Check out our full line of Industrial Hardware on our website: rspsupply.com • Additional Links - • Website: • https://rspsupply.com/ • Engineering Page: • https://rspsupply.com/engineering/ • Panel Fabrication Page: • https://rspsupply.com/panel-fabrication/ • Procurement Services Page: • https://rspsupply.com/procurement-ser... • Manufacturers Page: • https://rspsupply.com/manufacturers.aspx • Surge Protection Filters: • https://rspsupply.com/c-6815-surge-pr... • Enclosures: • https://rspsupply.com/c-1618-enclosur... • Cable Wire Assemblies: • https://rspsupply.com/c-620-cable-wir... • Panel Hardware: • https://rspsupply.com/c-34-panel-hard... • Power Supplies Regulation: • https://rspsupply.com/c-675-power-sup...

#############################

New on site