Oldsmobile Bravada SUV Replacement Remote Programming 2002 2004

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ZFOZLBg76X4

Visit us at http://www.carandtruckremotes.com/ • • Programming Instructions for a Oldsmobile Bravada Replacement Remote Programming 2002 – 2004 • 1. Close all vehicle doors. • 2. Insert the key into the ignition. • 3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9. • 4. Perform steps 5 through 8 in fairly rapid succession. • 5. Turn the ignition switch to the ON position (as far as you can go without starting the engine). • 6. Turn the ignition switch to the OFF position. • 7. Turn the ignition switch to the ON position. • 8. Turn the ignition switch to the OFF position. • 9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically. • 10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds. • 11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters). • 12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

#############################

New on site