Youtor
OxyHydrogenHHO generator Acrylic Flame PolisherWelder H180 95 lh 220V
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ZQCwOfy4ZwA
Model: H180 • Max. gas flow rate: 95 Liter/Hour • Flame temperature: 2800℃ • Cell volume: 1800 ml • Electrolytic cells: 1 • Voltage: AC220V 1.5A • Water consumption: 30 mL/Hour • Solution density: 15% • Pressure range: 1.3 - 1.5 bar • Weight: 9 Kg • Flame torch supplied: 1 • Torch tip supplied: 2 • Size: 480 x 280 x 360mm • There is no flashback arrestor on the hose, the flame most of the time stops at the tip (the bubbler is a flashback arrestor). • Potassium Hydroxide (KOH) is sold separately • KOH dissolves very quickly in water and theoretically it remains in the electrolysis cell, it is not eliminated with the HHO gas, just add more distilled water when needed. • HHO = Oxy-Hydrogen, highly flammable gas, it does not require air to burn, it already contains both the fuel (H) and the oxidant (O). • The device automatically stops when the pressure reaches around 1.5 bar (1.52 kgf/cm2) and it automatically starts when the pressure drops below around 0.7 bar. • The flame goes out if the valve is opened too much (too high pressure). • The flame is mostly invisible but at max flame size it can burn a paper even from a distance of around 10cm (3.9 inch). • Wear dark eye protection against metal sparks and blinding light! • https://www.ebay.com/sch/i.html?_from...
#############################
