How to Install an Elkay Top Mount Sink

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ZWg9a_8JKdw

Make sure you check all parts and follow the included installation instructions. • Recommended Tools Supplies: • · Silicone sealant and caulk gun • · Mineral spirits and a clean, lint-free cloth • · Flat head screwdriver • • Step 1: Start with a clean countertop, clear of obstructions above below. American Standard recommends a professional countertop installer to cut the sink opening. • • Step 2: Check the fit. The sink must sit properly, and be supported on all four corners. • • Step 3: Assemble the screws and clamps. Slide the clamp assembli8es into the U channels, evenly spaced. Turn the clamps in the same direction as the U channel. Hand tighten the screws – do not over tighten! • • Step 4: Apply a generous amount of sealant. • • Step 5: Carefully lower the sink onto the sealant. Apply firm, even pressure. • • Step 6: Loosen each screw. Turn the clamps 90 degrees to catch the countertop bottom. Hand tighten the screws. Do not over tighten! • • Step 7: Recheck the sink position. • • Step 8: Tighten all screws an additional ¼ turn with the screwdriver. • WARNING: Over tightening could result in improper installation or damage to sink. • • Step 9: Wipe away excess sealant. • • Step 10: Connect the faucet and drain assembly and you’re all set! • • Note: Some of the American Standard sinks can be installed under the counter. We recommend professional installation for under counter mounting. • Subscribe to our Channel: • http://www.bit.ly/AmericanStandardSub... • American Standard on Facebook: / americanstandardplumbing • American Standard on Twitter: • / amstandard • American Standard on Instagram: / american_standard • American Standard on Pinterest: / amstandard • Find More Great Videos from American Standard: / americanstandard01 • Check out our Luxury Bathroom Products at DXV by American Standard: • / dxvluxury

#############################

New on site