Youtor
Minariks 23000C Series of DC Drives for Basic Operation
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Zp4NAvphmPc
Minarik's 23000C Series of DC Drives for Basic Operation. Presented by Katie Rydzewski for Galco TV. Buy the items featured in this video at 800-337-1720 or visit: http://www.galco.com/shop/MM23000C-Mi... • The MM23000C Series of drives are a reliable and cost‑effective solution for controlling your permanent magnet or shunt‑wound DC motors in variable‑speed applications. The MM23000C series uses SCRs to provide full‑wave rectification of the AC line input. These dual voltage drives operate using 115 VAC or 230 VAC 50/60 Hz, to run 90 or 180 VDC SCR brush‑type motors. These drives control motors from 1/20 to 2 HP and come in chassis, NEMA 1, and NEMA 4X models. Cased models include AC line fuses. • MM23000C Series Features: • MM Footprint: Chassis Drives have a Compact Industry Standard Footprint • Speed Range and Regulation: 1% Regulation Over 60:1 Speed Range • User Adjustable Calibration Pots: IR Compensation, Min Speed, Max Speed, Current Limit, Acceleration and Deceleration • Diagnostic LED: LED for Current Limit Status on All Models. Cased Models have a Green Power Light • Stopping Modes: Inhibit (N/O) for Coasting to a Stop on All Models. Dynamic Braking Included on MM232x1C • For more Minarik DC Drives go to: http://www.galco.com/shop/Minarik-Dri... • To find more Minarik Drives visit: http://www.galco.com/get/Minarik-Driv... • And for the full line of Minarik Drives Products visit: http://www.galco.com/find/Minarik-Dri... • Galco is a Factory Authorized Stocking Distributor for Over 150 Brands of Industrial Electrical Electronic Automation, Controls and Component Products; On-Site and Send-In Repair Services for Industrial Control Automation Products for Over 2,000 Brands; Engineered Systems Integration, Retrofits Upgrades for Variable Speed Drives, CNC, PLC Systems, Dynamometers Test Stand Applications. Visit us online at http:// www.galco.com or call us at 800-337-1720. • http://www.galco.com/safety • With respect to the usage, installation or assembly of any products described in this video, Galco Industrial Electronics, Inc., a Michigan corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970, Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electric Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician. • GTV, Galco, galco.com, Galco Industrial Electronics, and Galco Industrial Electronics, Inc. are registered and/or pending registered trademarks under the U.S. Patent and Trademark Office, assumed names, registered domain names, and/or trade names of Galco Industrial Electronics, Inc., a Michigan corporation. • LEGAL DISCLAIMER: • While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Galco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided as is , with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warrantees of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Galco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.
#############################
