Youtor
Gen4 2012 Honda CRV brake fluid flush 1 person method
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=_DHKuMd0o_k
As of 1/24/22: 638 likes, 32 dislikes • This video shows the process for flushing the brake fluid on a 4th generation Honda CR-V (2012+). Shown in the video is a 2013 EX AWD model, but I believe the process should be identical for all the trim levels within this generation. • You should use only DOT3 and DOT4 brake fluid, not DOT5. DOT4 will have a higher dry boiling point, but in normal operation (i.e. no towing or big mountain descents) there should be no observable difference between DOT3 and DOT4. Conventional wisdom says that the boiling point of DOT4 fluid will fall more quickly for the same amount of moisture absorbed (brake fluid is highly hygroscopic), so I prefer DOT3 in my vehicles with a reasonable service interval (~2 years, independent of mielage). • The use of Honda brake fluid is not necessary in this case. Prestone and Valvoline fluids (or whatever else is available) will work just fine here. • The process shown here is called the 1-person method, and does not require the use of any specialized tools. I prefer using this method even with 2 people, as it is easier and takes less time. • If you want to change your rear pads at the same time, I also have a video for that: • • Honda CRV rear brake pad change 2012 ... • Hope you find this video helpful, happy wrenching!
#############################
