Youtor
Is ASME Sec VIII Div2 the future
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=_Gd5g9ug0vE
Learn More Link: • https://docs.google.com/forms/d/e/1FA... • In case of any queries feel free to contact us on: • +91 8369653336 • +91 8928865726 • 0:00 Intro • 0:09 Div 1 or Div 2 • 2:32 Structure of Div 2 • 4:01 FOS • 13:36 Complexity of Design • 21:04 Material • 23:50 Use of FEA • 24:58 NDE • 29:20 Documentation • 29:55 Certification • 35:38 What ASME Says • 36:32 Our ASME SEC VIII DIV 2 Course • • PART 1 GENERAL REQUIREMENTS • 1.2 SCOPE • Annex 1-B ANNEX 1-B DEFINITIONS • Annex 1-C ANNEX 1-C GUIDANCE FOR THE USE OF U.S. CUSTOMARY AND SI UNITS IN • PART 2 RESPONSIBILITIES AND DUTIES • 2.2.3 UDS (USER DESIGN SPECIFICATION) • Annex 2-A ANNEX 2-A GUIDE FOR CERTIFYING A USER’S DESIGN SPECIFICATION • 2.3.3 MANUFACTURER’S RESPONSIBILITIES • Annex 2-B MANUFACTURER’S DESIGN REPORT (Annex 2-B) • 2.3.3.2 Contents of the Manufacturer's Design Report • Table 2-D.1 Table 2-D.1 Instructions for the Preparation of Manufacturer’s Data Reports • FORM A-1 FORM A-1 MANUFACTURER’S DATA REPORT FOR PRESSURE VESSELS • ANNEX 2-J ANNEX 2-J QUALIFICATIONS AND REQUIREMENTS FOR CERTIFYING • PART 3 MATERIALS REQUIREMENTS • 3.2 MATERIALS PERMITTED FOR CONSTRUCTION OF VESSEL PARTS • 3.3 SUPPLEMENTAL REQUIREMENTS FOR FERROUS MATERIALS • 3.3.3 ULTRASONIC EXAMINATION OF PLATES / FORGINGS • Annex 3-F ANNEX 3-F DESIGN FATIGUE CURVES • PART 4 DESIGN BY RULE REQUIREMENTS • 4.1.1 SCOPE: CLASS 1 AND CLASS 2 • 4.1.2 MINIMUM THICKNESS REQUIREMENTS • 4.1.4 CORROSION ALLOWANCE IN DESIGN EQUATIONS • 4.1.5.2 Definitions • 4.1.5.3 Design Loads and Load Case Combinations, Table 4.1.1 Design Loads Table • 4.1.6 DESIGN ALLOWABLE STRESS: Design Condition Test Condition • 4.2 DESIGN RULES FOR WELDED JOINTS • 4.2.2 WELD CATEGORY • 4.2.3 WELD JOINT TYPE • 4.2.4 WELD JOINT EFFICIENCY • 4.2.5 TYPES OF JOINTS PERMITTED • 4.3 DESIGN RULES FOR SHELLS UNDER INTERNAL PRESSURE • 4.3.3 CYLINDRICAL SHELLS • 4.3.4 CONICAL SHELLS • 4.3.5 SPHERICAL SHELLS AND HEMISPHERICAL HEADS • 4.3.6 TORISPHERICAL HEADS • 4.3.7 ELLIPSOIDAL HEADS • 4.3.10 COMBINED LOADINGS AND ALLOWABLE STRESSES • 4.3.11 CYLINDRICAL-TO-CONICAL SHELL TRANSITION JUNCTIONS WITHOUTKNUCKLE • 4.3.12 CYLINDRICAL-TO-CONICAL SHELL TRANSITION JUNCTIONS WITH A KNUCKLE • 4.4.4.1 Permissible Out-of-Roundness of Cylindrical and Conical Shells • 4.4.4.2 Cylindrical and Conical Shells Subject to Uniform Axial Compression and Axial C • 4.4.5 CYLINDRICAL SHELL: For external pressure • 4.4.6 CONICAL SHELL • 4.4.7 SPHERICAL SHELL AND HEMISPHERICAL HEAD • 4.4.8 TORISPHERICAL HEAD • 4.4.9 ELLIPSOIDAL HEAD • 4.4.12 COMBINED LOADINGS AND ALLOWABLE COMPRESSIVE STRESSES • 4.5 DESIGN RULES FOR OPENINGS IN SHELLS AND HEADS • 4.5.4 NOZZLE NECK MINIMUM THICKNESS REQUIREMENTS • 4.9 DESIGN RULES FOR BRACED AND STAYED SURFACES • 4.10 DESIGN RULES FOR LIGAMENTS • 4.11 DESIGN RULES FOR JACKETED VESSELS • 4.12 DESIGN RULES FOR NONCIRCULAR VESSELS • 4.13 DESIGN RULES FOR LAYERED VESSELS • 4.15 DESIGN RULES FOR SUPPORTS AND ATTACHMENTS • 4.15.3 SADDLE SUPPORTS FOR HORIZONTAL VESSELS • 4.15.4 SKIRT SUPPORTS FOR VERTICAL VESSELS • 4.15.5 LUG AND LEG SUPPORTS • 4.16 DESIGN RULES FOR FLANGED JOINTS • 4.16.12 EVALUATION OF EXTERNAL FORCES AND MOMENTS FOR FLANGED JOINTS • 4.18 DESIGN RULES FOR SHELL-AND-TUBE HEAT EXCHANGERS • 4.18.7 RULES FOR THE DESIGN OF U-TUBE TUBESHEETS • 4.18.8 RULES FOR THE DESIGN OF FIXED TUBESHEETS • 4.18.9 RULES FOR THE DESIGN OF FLOATING TUBESHEETS • 4.21 TUBE-TO-TUBESHEET JOINT STRENGTH • PART 5 DESIGN BY ANALYSIS REQUIREMENTS • Table 5.1 Loads and Load Cases to Be Considered in a Design • Table 5.2 Load Combination Parameters • Table 5.3 Load Case Combinations and Allowable Stresses for an Elastic Analysis • Table 5.6 Examples of Stress Classification • Figure 5.1 Stress Categories and Limits of Equivalent Stress • PART 6 FABRICATION REQUIREMENTS • 6.1 GENERAL FABRICATION REQUIREMENTS • 6.1.2 FORMING • 6.1.4 FITTING AND ALIGNMENT • 6.2.4 SPECIFIC REQUIREMENTS FOR WELDED JOINTS • 6.4.2 REQUIREMENTS FOR POSTWELD HEAT TREATMENT • PART 7 INSPECTION AND EXAMINATION REQUIREMENTS • Table 7.1 Examination Groups for Pressure Vessels • Table 7.2 Non-destructive Examination • Table 7.6 Visual Examination Acceptance Criteria • Table 7.7 Radiographic Acceptance Standards for Rounded Indications • PART 8 PRESSURE TESTING REQUIREMENTS • 8.1.1 SELECTION OF PRESSURE TEST METHODS • 8.2.1 TEST PRESSURE • PART 9 PRESSURE VESSEL OVERPRESSURE PROTECTION • 9.3 DETERMINATION OF PRESSURE-RELIEVING REQUIREMENTS • 9.4 OVERPRESSURE LIMITS • 9.5 PERMITTED PRESSURE RELIEF DEVICES AND METHODS
#############################
