C5 CORVETTE PUSH BUTTON START OPEN BOX INSTALL AND THOUGHTS

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=_H6iwhOtfms

FINALLY, A PUSH BUTTON START TUTORIAL FOR THOSE LOOKING FOR A KEYLESS ALTERNATIVE. NOT ONLY IS THIS A PUSH START, BUT IT IS ALSO A PASSIVE SYSTEM THAT WILL LOCK AND UNLCOCK WITHIN A CERTAIN PROXIMATEY. REMOTE START DOOR AND TRUNK RELEASE FUNCTIONS WORK FLAWLESSLY. • HERE ARE THE PARTS REQUIRED: • EASY GUARD EC002 • https://www.amazon.com/EASYGUARD-Pass... • A SINGLE POLE DOUBLE THROW RELAY • https://www.amazon.com/PACK-AMP-Water... • VATS BY-PASS KIT (OR JUST THE RESISTOR) • https://www.ebay.ca/itm/The-Install-B... • COLUMN LOCK BYPASS LMC5 KIT • https://www.amazon.com/LMC5-Module-Co... • • TOOLS REQUIRED: • 10 MM SOCKET • T20 TORX BIT • T30 TORX BIT • TRIM POP TOOL • SOLDERING IRON SOLDER • WIRE TAPS IF NOT SOLDERING • ELECTRICAL TAPE OR SHRINK WIRE • AT LEAST 10’ EXTRA WIRE FOR DOORS • FLAT HEAD SCREW DRIVER • ZIP TIES • MINIMUM OF 3 BEERS • USEFUL LINKS: • https://www.corvetteforum.com/forums/... • • SPECIAL THANKS TO YOUTUBER “CHAINSAW” FOR ASSISTING WITH DOOR WIRING AND PROVIDING THE IDEA FOR THE RELAY TO SUBSTITUE THE KEY IN IGNITION.

#############################

New on site