Arduino Tutorial ArduinopulldownresistorBeginner Project

YOUR LINK HERE:

http://youtube.com/watch?v=___QP8R9VGU

components list: • 1) Arduino UNO or Nano 1 pice • 2) Led 1 pice • 3) Resistor(4.7k or 10k) 1 pice • 4) Resistor(330ohm or 1k) 1 pice • 5) Push Buttom 1 pice • 6) some jumper wire • 7) Breadboard 1 pice • 8) 9-volt battery 1 pice • connection: • Connect the push button between Arduino pin 4 and GND with a resistor(4.7k or 10k), and other side connect 5volt. • led pin to connect with a resistor (330ohm or 1k) in Arduino pin 8.led negative pin connect GND. • code circuit: • https://github.com/ahmokther/Arduino-... • -______________________________________________________ • Song: Jim Yosef - Link [NCS Release] • Music provided by NoCopyrightSounds. • Watch: • Jim Yosef - Link | House | NCS - Copy... • Download/Stream: http://ncs.io/LinkYO • - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

#############################

New on site