How to install a TOGGLER® SnapSkru SelfDrilling Plasterboard Fixing

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=_k9QMy3Ybgc

Learn just how quick and easy it is to install the TOGGLER SnapSkru®. • SnapSkru is available to buy in the UK here: https://www.toggler-uk.com/snapskru/ • The TOGGLER SnapSkru® is not an ordinary self-drilling drywall anchor; it is in fact the only anchor that symmetrically locks on to the wall or ceiling for a truly secure fastening – with up to 80% more holding power than conventional anchors on the market. • Every time you tug on a toilet tissue holder or a disabled handrail, or even a window blind, other self-drilling anchors come out as quickly as they went in, because nothing prevents their sharp threads from cutting back through the drywall. The SnapSkru® anchor’s built-in positive stop resists over-drilling and then opens with an audible ‘pop’, positively locking the anchor to the rear of the wall to resist vibration and shock. In doing so, the drywall gypsum and its paper is kept under compression, immediately reinforcing the anchor point and providing much greater holding power. Plus, the SnapSkru® anchor allows the screw to be removed, without removing the anchor or damaging the wall! • – Exceptionally strong! Up to 80% more load than other reported self-drilling drywall anchors. • – Accepts a range of screw sizes! Use 3.5, 4.0, 4.5 AND 5.0mm screws! (#6, #8, #10) • – Built-in positive stop! Prevents overdriving the anchor when using a screwgun. • – Once it ‘POP’s you know its locked! Activates with an audible sound to feedback correct installation. • – Remove the screw, without the anchor! Then re-install later, in the same anchor, with the same screw. • – Resist vibration and shock! By locking its thread into the wall, Snapskru anchors do NOT pull loose when vibrated or shocked, nor do they pull out when the screw is removed! • Find full technical information here: https://www.toggler-uk.com/wp-content...

#############################

New on site