detachable 3S LEGO Ropeway kuppelbare Seilbahn Version 20

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=a2TBpqhBTaA

Video with intermediate Station here: • Detachable 3S LEGO ropeway intermedia... • First video of my new ropeway-system with the new station design. • There are 8 Gondolas running and between the stations I placed 3 masts. • The ropeway is powered by 16 Motors. 8 of them for the conveyor-system, 5 to power the haul-rope, 3 for the two pneumatic valves and compressor. • Those motors are controlled by 2 RCX-Computers programmed in C with Bricx. 6 Sensors (blue in the video) are attached. • Two rotation-sensors detect if the rope fell out of a deflection pulley by supervising the differential gearbox located in the center of the stations. • To maintain a constant distance between the gondolas, two light-sensors detect the gondolas and the RCX-Computers slow down the conveyor-system where needed. • The tension of the pulling rope is controlled by 2 pneumatic cylinders. The tension of the rope, respectively the air-pressure is measured by a third rotation-sensor attached to the compressors motor. • If you have any questions ore advice, please comment or write me a message. • Thanks for visiting my YouTube-Channel and • ...subscribe for more videos. :) • ...click like if you liked it :)

#############################

New on site