Manually Test a PSU Power Supply With a Multimeter by Britec

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ac7YMUcMjbw

Manually Test a (PSU) Power Supply With a Multimeter by Britec • NOTE: This testing applies only to the standard ATX PSU, it does not apply to proprietary PSU's (ie: older Dell's ) which use a different pinout arrangement for their ATX connectors (non-standard). • 20 and 24-Pin Connectors: The 24-Pin connector has an additional 4 pins attached to one end of the connector. The top 20-Pin section is electrically identical to the original 20-Pin ATX connector. Due to the additional connections the numbering sequence changes, so if you have a 24-Pin connection then make that adjustment when comparing with a 20-pin • +3.3v pins 1, 2, 11 (Orange wires) • +5V pins 4, 6, 19, 20, (Red wires) • +12V pin 10 (Yellow wires) • -5V pin 18 • -12V pin 12 • Need help with your computer? • http://www.briteccomputers.co.uk/forum

#############################

New on site