Tronxy X5SA 2020 unboxing assembly and a perfect first print

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=agwMSCSLyZw

Last weekend I assembled my new Tronxy X5SA. I had watched a couple videos on reviews and assembly and I have to say my experience was completely different than theirs. This is not a paid or sponsored video. I purchased it with my own money. The power supply was 24v not underpowered. Thermal protection was enabled, and the issues with it being misaligned I have to think is due to the builder and not the printer. The one issue I have had after doing some prints is the material the heat bed is made out of and the back that it is not perfectly flat. My prints embed into the bed and do not release I scratched it up pretty good trying to get one-off. I will follow up on this video with a video of how to set up Cura and fine-tune the adjustments to get everything working nicely. I had issues with shifting and stringing on my second print so I did a lot of calibrations and now large and small I have had really good results. If you would like to see a video about setting z-offset, bed leveling, and calibrating slicer please comment below. • The Tronxy X5SA can be purchased at: • Amazon https://amzn.to/3ep72ds • Printer features: • ARM 32bit Mainboard • CoreXY Motion Modes • 30P Integrated Wiring Design • Detachable Printing panel----Convenient for users to remove models • High Precision Large Build Size:330*330*400mm • Automatic Leveling --avoid a lot leveling troubles. • Filament Run Out Detection-- Automatic detection of filament usage, accurate voice warning • Power failure resume to print ---TRONXY X5SA PRO has the ability to resume printing even after a power outage or lapse occurs • 3.5 Inch Touch Screen---Clear display and simple control • Safe 24V power supply—Faster heating, more stable temperature, Very safe to use • TPU Model Real Shot ---Printed on X5SA PRO • 3.5-inch touch screen - clear and convenient, easy to operate 2, detachable aluminum plate - take the model more convenient, save trouble • Print principle: FDM (Fused deposition molding) • Print size: 330× 330×400 (mm3) • Print accuracy: 0.1-0.4 mm • Positioning accuracy: X/Y 0.0125mm，Z 0.002mm Nozzle quantity: 1 • Nozzle size: 0.4 mm • Print speed: 20~100mm/s (suggest 60mm/s) • Moving speed: 100mm/s • Filament: PLA, TPU, ABS, wood, pc,HIPS, wooden filament etc. • Slice software: Cura • Input format: .STL .OBJ • Output format: GCode • Connection: SD card, USB cable(Suitable for skilled users • Power input: 110V/220V AC, 50/60Hz • Power output： 24V/15A DC • Physical parameter Machine size: 580mm×645mm×660mm • Machine weight: 14.5kg

#############################

New on site