Youtor
Digital Storm HowTo 15b Check Power Supply using 24PIN ATX PSU Starter Bridge
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=bPKE9FZ4G8w
A short video demonstrating how to check a power supply(PSU) using a 24-PIN ATX jumper • https://www.digitalstorm.com/ • PSU Jumper: http://www.amazon.com/24-Pin-STARTER-... • REMEMBER • Whenever you open the case to work on your PC innards, always disconnect from power and ground yourself by touching a metal part of the chassis away from any internal component. • 1. Power down PC and disconnect the 24-PIN ATX power connector from the motherboard. Leave all other wires connected. • 2. On the top of the 24-Pin motherboard power cable(side with attachment clip), locate the green wire with a black wire directly adjacent to it. These wires should be 4th and 3rd from the end respectively. Your power supply may not have colored wire sleeves. If not, contact Digital Storm for assistance if you are uncomfortable with proceeding. • 3. Insert the starter bridge so the attached wire bridges the connection between the green black wires on the 24-Pin cable. • 4. Turn PSU switch on and check if the PSU fan is spinning or if any motherboard LED lights are on . Contact Digital Storm for further assistance if there are no lights on your motherboard.
#############################
