Ram Turbo Actuator Replacement 67 Cummins U010C

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=bgcGVOolvnM

Amazon Links: If you would please purchase through these links so I can get a small percentage of the sale to keep this channel going. THANK YOU!! • Turbo Actuator: https://amzn.to/37cOX0y • Craftsman Ratchet: https://amzn.to/3nYj8P0 • Tub For coolant: https://amzn.to/3o2Jq2W • Coolant Air purging tool: https://amzn.to/3ka3xKa 👈 A must have tool!!! • • Calibration Software: https://www.alfaobd.com/download.html • This video is about 2014 Ram Turbo Actuator Replacement- 6.7 Cummins. I remove the old actuator due to a U010C Lost Communication With Turbocharger / Supercharger Control Module A. The dealer told me I needed to replace the entire turbo. I was getting good exhaust brake function and good turbo boost so I was not convinced that the turbo was actually bad. I decided to purchase a turbo actuator first and then remove it and check my turbo charger to see if I needed to send it in for repair. In this video I remove the turbo actuator and check the actuator arm for functionality in full travel rate. The turbo charger actuator arm moves super easy line to line. Once I check this I determine that the actuator is the only fault for the U010C code. So with my new genuine holset actuator part number 5579127H I install it on the turbo. Before you begin you will need to drain the coolant which I did. Remove the old actuator prep the new actuator with grease. Plug in the new actuator only and leave it sitting on the shock mount. With the scan tool of your choice pre-align the actuator. The scan tool I used was alpha OBD. Once you pre-aligned the actuator you can then install the actuator on the turbo and finish the calibration process once this is complete go ahead and torque your bolts down in a crisscross pattern and refill your coolant.

#############################

New on site