JB3 Map switching

YOUR LINK HERE:

http://youtube.com/watch?v=cIH0ttIq4Kw

JB3 BETA v1.3 Map switching... • Showing how map switching is done via gas pedal. Switching to MAP-4. • • NOTE: It is suggested to press the START/STOP button without holding the brake after inserting the keyfob to activate the Dash lights or the accessories on mode.(Not shown in video) • • For each map description visit: • http://www.n54tech.com/forums/showthr... • • • FULL DIRECTIONS: • • Insert keyfob and press start/stop button without holding brake to turn ignition on (lights on dash, but engine not running/accessories on mode). • • Press and hold the gas pedal down to the floor for 4 or more seconds, and then release pedal. • This puts the JB3 in to listen mode. If you start the engine at this point you will be on map 0. • • For performance maps press the gas pedal to the floor and quickly release one time for each map you would like to select. • For example for map 3 press and release the gas 3 times, and start the engine.(As shown in video was MAP-4 so 4 times was pressed) • • Your map setting will be saved until changed. If you forget what map you are on, turn engine off and reset the map selection. • • NOTE: • This is not my car nor does this car have any modifications including a tune or any sort of aftermarket items, this was just a representation of how map switching is done.

#############################

New on site