Radioddity CB500 Anytone 500M 2 How to HIGH POWER MOD

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=cZUQJhKI1xw

How to mod your Radioddity CB-500 (Anytone AT-500M 2) to transmit up to 20 Watts FM and 18 Watts AM. No soldering is required anyone can do it. (Radio will be no longer type approved) • Full Radioddity CB-500 review here. • Radioddity CB-500 CB Radio with AMAZI... • Buy here. https://www.amazon.co.uk/dp/B0CTBPDM6S • Radioddity Website. https://www.radioddity.com/products/r... • SWR / Power meter review. • SWR-120 Digital SWR and Power Meter f... • Specifications • This CB radio can be used in US, EU and UK. • GENERAL: • Modulation Mode: AM/FM • Frequency Range: 26.565-27.99125MHz UK FM and Euro Channels • Frequency Tolerance: ± 5.0ppm • Input Voltage: 12/24V • Dimensions: 185 x 124 x 38 mm / 7.3 x 4.9 x 1.5 in • Weight: 620 g / 1.4 lbs • Operating Temperature Range: -20℃ to +50℃ • Current Drain: • Transmit: 3A MAX • Receive: Squelched 0.3A • VOL Max: 0.7A • Antenna Connector: UHF, SO-259 • TRANSMITTER: • Power Output: 4 Watts FM/AM • Transmission Interference: Inferior to 4nW • Frequency Response: 300-3000 Hz • Modulated Signal Distortion: Inferior to 5% • Output Impedance: 50 ohms • RECEIVER: • Sensitivity: Less than 1uV for 10dB(S+N)/N • Image Rejection: 70dB • Adjacent Channel Rejection: 60dB • IF Frequencies: • 1st 10.695 MHz • 2nd 455 KHz • Automatic Gain Control(AGC): • Less than 10dB change in audio • Output for Inputs from 10 to 50000uV • Squelch: Less than 1uV • Audio Output Power: 2 Watts at 8Ω, less than 10% distortion • Frequency Response: 300-3000 Hz • Note: This CB radio can be used in US, EU and UK. • • What’s in the box? • 1 x CB-500(with Car Charger) • 1 x Radio Bracket (with 2 Screws) • 2 x Pads • 1 x Handheld Microphone • 1 x Microphone Bracket • 4 x Mounting Screw • 4 x Gasket • 1 x Spare Fuse (F5A220V) • 1 x User Manual

#############################

New on site