Touchless 1 amp 2 NEW NonHazmat 2Step truck wash soaps 2021

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=cfZ3sTRYJWs

GET IT HERE! https://touchless.washproduct.com • Introducing our brand new 2-step touchless wash soaps! Non-hazmat soaps that can be shipped SAFELY LEGALLY directly to your door with standard shipping carriers. The perfect solution for a quick maintenance wash between normal brush washes. Touchless 1 2 are concentrates, so a little bit goes a long way! • Main Benefits: • Neutralizes salt/grime to protect your paint job • Safe on all vehicle surfaces (Including polished aluminum/chrome) • Fast/Easy/Effective maintenance wash • Gets surfaces 80-90% clean (On par with competitors Hazmat soaps) • Works with foam cannons or foam lance systems • How To 2-Step: • Cost breakdown: • 90 for 1 gallon of each • 1 gallon fills 12.5 foam cannons • 1 foam cannon = $7.2 to fill up • If you use a whole foam cannon it costs you $7.20 for your wash + time • If you use half a foam cannon it cost you $3.60 to wash + time. • Saving time not waiting in line at truck wash • Saving time and money not going out of your way to a truck wash • -Saving time not pulling out bucket and brush • Can wash a cab with a sleeper in 35 minutes. • (Optional Step) For extra cleaning power, pre-soak your surface with Bug Remover to help cut through extra road film. • Dilute in foam cannon - 1 part soap to 3 parts water • Apply soaps from bottom up • Foam Touchless 1 onto your surface • Foam Touchless 2 overtop of Touchless 1 • High pressure rinse entire surface. Keep wand 6-12 away while maintaining a 90 degree contact angle with your surface. • Rinse thoroughly from top to bottom • What to expect from any 2-step: • Touchless/Brushless soaps, whether it's our product or a competitors, do not get your surface 100% clean. We tested a top competitor's 2-step soaps alongside ours and determined both leave about 10% road film that you can only see up close when you run your finger through it. This is expected behavior for 2-step in general. These types of products are meant to be used for maintenance washes between your normal brush/mitt wash. They are not meant to completely replace washing with a brush/mitt. • Our recommended weekly wash process: • Detailed Wash - We use our full prep/wash/protect process once per week. Start with bug remover to pre-soak bug remains and heavy road grime. Then we foam on some Platinum Wash soap and scrub the surface clean. After scrubbing, rinse thoroughly. Once the surface is 100% cleaned, we apply a coating of Invisishield (our foam on wax replacement) rinse off. • 2-Step • Between detailed washes, we use Touchless 1 2 to neutralize road salt/grime and help keep the surface clean and free of extra build up.

#############################

New on site