DIY Compact 100W flashlight 10000 Lumens Max

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ciRrrC5OS6c

This is a project that I have been working on for some time. I sincerely hope you enjoyed it. ( : • WARNING: DO NOT look into the LED at close range when powered, it has the power to burn through your retina in seconds. • If you plan to make this, there are few things to remember; • 1. depending on the parts you bought, my design may not fit perfectly. • 2. you may need to drill a few holes here and there, especially when mounting the battery compartment. • 3. The fan needs to be overvolted slightly to keep the LED cool, alternatively, you may use a 50W LED, and set the current to 1.5A, everything else remains the same. • 4. You MUST print the Parts beyond the voltage booster in ABS or other higher temperature plastic. PLA will melt. • Parts List: (some are affiliate) • LED:https://amzn.to/2THdIbJ • Boost Converter:https://amzn.to/2I1bZNe • Heat Sink: https://www.amazon.com/StarTech-com-6... • Mini Voltmeter:https://amzn.to/2DyCjJ9 • Lens: https://www.ebay.com/itm/1-Set-LED-44... • I am confident that you can find the rest of the components by yourself. • Link to STL for 3D printing: https://www.thingiverse.com/thing:307... • Music used: Throwback -Jim Yosef • / @jimyosef

#############################

New on site