Youtor
Programming your Toyota Sienna Remote
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=dpKWaTKgqas
An easy to follow video on how to program a remote key fob for a 1999 - 2003 Toyota Sienna. • More free keyless entry programming instructions available at http://www.ProgramYourRemote.com/ • 1. Start with key out of ignition, drivers door is open all others closed and drivers door is unlocked. • 2. Insert key into the ignition (Do NOT Turn) and Pull key out. • 3. Perform these steps within 40 seconds. • A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 Cycle = 1 lock and 1 unlock). • B. Close, then open drivers door. • 4. Perform these steps within 40 seconds. • A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 Cycle = 1 lock and 1 unlock). • B. Insert the key in the ignition cylinder. • C. Turn the ignition to ON (Do NOT Start) then back to OFF. • D. Remove the key from the ignition. • 5. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. • 6. Perform these steps within 40 seconds. • A. Press the lock and unlock buttons on the remote simultaneously for 1 second. • B. Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once indicating successful programming. If the door locks do not cycle, or cycle twice. Repeat steps A and B in step 6 as your remote has not been accepted. • C. Repeat steps A and B in step 6 for each new remote. • 7. Close drivers door.
#############################
