How to programming rf remote controller single led strips

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=e2yV2cWbDsA

How to programming rf remote controller single led strips • 1. connect the rf led remote controller to 12-24 voltage (DC 12V). • 2. turn the led strip on with remote. • 3. then push the two buttons SPEED - and SPEED + at the same time in. • 4. the leds going flashing and ur setting is done. • How to programm second rf controller. • 5. disconnect the first rf controller from power supply 12V. • 6. connect the second rf controller to 12-24V and follow the step by step 2 to 4 • 7. by using three rf controllers then disconnect the first and second rf controller before programm the third rf controller. • Now you can install more rf controllers without all leds going fired up in the same time. You not have to line of sight to the controller. You can build in hardware hide the controller it reacts by a stone wall and also of several meters away it have a very strong signal! • Perfect for home decoration rf remote control hidding in hardware diy led light project inspired. • Living Easy David O'Brien • होम आंतरिक एलईडी लाइट्स • पावर एलईडी पट्टी कनेक्ट करने के लिए कैसे • #Mindmadedesigns

#############################

New on site