Write code faster in VS Code with Emmet shortcuts

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=e8BoMeNGfas

Timestamps listed below • This video covers the basic codes you need to know for CNC. They are G0, G1, G20, G21 G28 • If you are new to CNC, you must understand G-code and the top 5 codes you will need to know. • G-code is the language CNC machines use to move through various motions. In other words, if you want the machine to move, it must have g code commands to tell it how to move. G-code and CNC machines are married. They cannot work without each other. • This video covers the top 5 you will need to know about when getting into CNC machining or routing. These work in any CNC machine that uses gcode, including routers and lasers. • This works for all CNC machines, routers, lasers, bobscnc, shapeoko, x-carve, xcarve, etc • This CNC code will get you started in your CNC endeavors. • The top 5 G-codes you must know in CNC are: • G0 - Linear rapid motion • G1 - Linear feed rate • G28 - Rapid to the home position • G20 - The machine will move in inches • G21 - the machine will move in millimeters • Timestamps • G0 G1 - 1:11 • G28 - 7:12 • G20 G21 - 8:33 • __________________________________ • ROUTER BITS FOR CNC ROUTERS • 12pc Complete CNC Router Bit Starter Set → https://www.idcwoodcraft.com/11P-SET-W • 6pc Essentials CNC Router Bit Starter Set → https://www.idcwoodcraft.com/6P-SET • 1” Ultra-Smooth Cutting Surfacing Bit → https://www.idcwoodcraft.com/SU-10 • Other bits: IDC Woodcraft Website → www.idcwoodcraft.com • ----------------------------------------------------- • IDC Woodcraft Mobile App (FREE) • Apple → https://link.idcwoodcraft.com/vax4kc • Android → https://link.idcwoodcraft.com/32hhz5 • ----------------------------------------------------- • OTHER ‘MUST HAVES’ FOR CNC ROUTERS • Calipers → https://link.idcwoodcraft.com/vp2a3e • Sanding/Buffing Brushes → https://link.idcwoodcraft.com/u01ge2 • CA Glue - 10% Off with Code: IDC WOODCRAFT : https://link.idcwoodcraft.com/5fj21e • ------------------------------------------------------ • RECOMMENDED DESIGN SOFTWARE • Vcarve Pro (RECOMMENDED) → https://link.idcwoodcraft.com/c19df4 • Vcarve Desktop → https://link.idcwoodcraft.com/63mso5 • Vectric Aspire → https://link.idcwoodcraft.com/7zfwyp • Cut2D Desktop → https://www.vectric.com/products/cut2... • ----------------------------------------------------- • COMPLETE VECTRIC SOFTWARE TRAINING → https://academy.learnyourcnc.com/a/21... • ---------------------------------------------------- • GSENDER CNC CONTROL → https://sienci.com/gsender/?ref=IDCWO... • ---------------------------------------------------- • CNC RESOURCES • CNC Set Up Checklist → https://link.idcwoodcraft.com/xi8r0n • Ultimate CNC Router Buyer’s Guide → https://link.idcwoodcraft.com/xxakuh • Machine Setup Checklist → https://link.idcwoodcraft.com/yz5k2m • ----------------------------------------------------- • RECOMMENDED CNC ROUTERS • Altmill CNC Router → https://link.idcwoodcraft.com/k0ecg7 • Longmill CNC Router → https://link.idcwoodcraft.com/a0x8z9 • --------------------------------------------- • CNC ENTREPRENEURS Facebook Group → / cncentrepreneurs • ------------------------------------------------------ • CNC Insiders (free files and more) → https://idcwoodcraft.com/cnc-lp2-free... • ------------------------------------------------------ • SUPPORT THE CHANNEL → https://www.buymeacoffee.com/garrettf... • ------------------------------------------------------ • PODCASTS → https://anchor.fm/cnc-for-beginners • ------------------------------------------------------ • Email: [email protected] • #gcode #cnc #g-code #cnc #cncrouters #cncforbeginners #idcwoodcraft

#############################

New on site