Honda Accord Sway Bar Bushings Replacement

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=eJHQ5spPAyY

A fastener by fastener tutorial for replacing the sway bar end bushings and frame bushings on 94-97 Accords. • The common symptom of a failed sway bar bushing is a clunk or knocking sound when going over bumps. • When one or more of the donut bushings crack metal to metal contact between the sway bar and the lower control arm occurs which causes the noise. • For 1994-1997 Accords the bushings are sold separately and are Honda part number 51314-SM4-020. You will need a total of 8 (4 per side). • In the video I say you can use penetrating oil on the frame bushings to make them slide on easier. I misspoke. Do NOT use petroleum based lubricants (such as penetrating oil) on the rubber and only use silicone based lubricants. Petroleum based lubes will harm the rubber silicone won't. • Gearhead Kevin MacLeod (incompetech.com) • Licensed under Creative Commons: By Attribution 3.0 License • http://creativecommons.org/licenses/b... • Due to factors beyond the control of Bushougoma, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Bushougoma assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Bushougoma recommends safe practices when working with the tools or equipment seen or implied in this video. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Bushougoma.

#############################

New on site