DIY Dust Collector System with Homemade Blast Gates and Automatic StartStop Function

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=eVlJP4naUfM

Continuing off with my DIY dust collector cyclone system I added all the duct work to hook up dust collection to my tools. I show how I added dust ports to the router table, drill press, table saw and band saw. The drill press dust collection is via a loc-line system sold by lee valley. I made homemade blast gates from some hardboard and 5/8 melamine particle board. I used a non contact magnet door alarm system to control a low voltage dc relay to control the motor operation when the blast gates are opened and closed. • I made free plans for the blast gates on my website (link below) • Buy a T-shirt to support the channel: • https://teespring.com/stores/diy-builds • Visit my website for free plans and see viewer builds: • http://diybuilds.ca • Follow me on Instagram: • / diybuilds • Follow me on Facebook: • / diybuilds • Support DIY Builds on Patreon: • / diybuilds • #DIYBuilds • #Woodworking • #DIY

#############################

New on site