Youtor
Tutorial How to Make a Reamer
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ekx7DlOFJHs
Reamer ? Yes i need a reamer for a special screw hole for engine head (M14x1), i decided to DIY as better as i can; i need a reamer because the pitch of the hole have to be 13 mm and i don't have an endmill of 13 mm. • Here you can find the result that i got! • Chapters: • 00:00 Intro • 00:32 Describing the part to be done • 02:26 Description of the hole and reamer • 07:28 Turning the reamer to correct dimensions • 12:16 Description of the angle typical of an end mill /reamer • 14:41 Description of my dividing head • 21:39 Machining the reamer's tooth on my dividing head • 23:08 Final Considerations on the reamer dimensions and tooths • 24:40 Quenching and tempering the reamer on water • 25:23 Sticker from Haxby Shed • 25:37 Conclusion and Bye • At the end there will be a surprise, a sticker from a friend from England: • Haxby Shed • • HS133 Haxby Shed 2500 subscriber priz... • In this video I used: • Colchester Bantam lathe Mk1 short bed (1964) • Sieg SX3L milling machine (2019) • Join the channel !! • If you like my videos, don't forget to click LIKE SUBSCRIBE !!! • AB-SHOP • #machineshop #hobbymachinist #machinist • ?sub_confirmation=1
#############################
