Cadillac Escalade AC Blend Door Actuator HVAC

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=embUVHD3O4o

This 2002 Cadillac Escalade has an HVAC problem. When A/C is selected on the control unit, cold air blows in the back and warm air blows in the front. This is caused by the blend door actuator not working properly. You can fix this problem by replacing the blend door actuator. When you install the actuator, you must reset the computers that control it. • You can buy a new blend door actuator on Amazon: http://amzn.to/2orFgCw • This is how you reset the blend door actuator: • Step 1: Disconnect the battery (negative terminal only), let it sit disconnected for 1 minute, then reconnect. • Step 2: Turn the key into the on position so the dash lights up, let it sit for 3-5 minutes, then turn off the key, and let sit for 30 seconds. • Step 3: enjoy your new blend door actuator • Every repair situation is unique. ZipZapDIY cannot guarantee that your repair will be the same as depicted in this video. You should use this video as one information source of many, and you use this information at your own risk. Any tools, parts recommendations links used in this video must be verified by you to be applicable to your situation. ZipZapDIY cannot be held liable for any results from your improper use of tools or repairs. ZipZapDIY highly encourages you to seek out multiple sources of information regarding the repair depicted in this video. There is no warranty expressed or implied warranty or guarantee that you will experience similar results. You are solely responsible for the safe use of tools and equipment during your repair. • https://zipzapdiy.com • Tools and Parts on Amazon: http://amzn.to/2on8iab

#############################

New on site