Pulling The Trans In a Top Dragster How To Part 2

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=enKJBIufJn4

Removing all the parts that are in the way and then pulling the transmission out of the new Computech Top Dragster. This offseason we decided to upgrade our torque converter from a 9 to a 10 and thanks to the guys over at FTI Performance, we were able to get it installed on this weeks episode of Sudden Rush Shop. • Installing a toque converter in a dragster is pretty easy and can be done in as quick as 30 minutes to as long as a couple hours depending on how much help you have and how fast you need to go. It will definitely help to have at least one extra person to help heave the transmission out. • The first step is to drain the transmission. Then while that is draining we need to remove all the things that are in the way of removing the trans. We remove the headers, coil, dial board, trans cooler, blowback support, oil filter, trans overflow tank, rear tires and driveshaft. Then we are able to remove the torque converter bolts by using the bump button to rotate the engine. Finally the transmission bolts come out and we jack the trans up to make it easier to lift out. We also install a convert holder device to keep the converter from falling out, then heave it out and onto the workbench. • We then inspect the flexplate for cracks or chipped teeth on the ring gear and add 1 quart of Automatic Transmission Fluid to the converter. Then we carefully place it into the trans, aligning the two gears and final keyways. Then install the converter holder bracket, pop it back in the trans and re-install everything. When tightening the converter bolts, with the converter shoved all the way back, we want a gap of .125 to .185 , so make sure to use spacers to get the appropriate gap before tightening. Once everything is installed we can add 5 quarts of new ATF fluid, and when the time comes we will fire up the engine, run the trans some and re-fill until the dipstick level is ideal. • That's it for this weeks episode of Sudden Rush Shop. Thank you very much for watching and please hit the like and subscribe button to help our channel grow. • #short #shorts #shortsfeed #shortvideo #shortsvideo #shortsyoutube • #computech #dragracing #bracketracing #pdra #gofast #juniordragster #junior #howto #howtomake #nhra #topdragster #dragster #torqueconverter #ftiperformance

#############################

New on site