How to setup a Raspberry Pi RFID RC522 Chip

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=evRuZRxvPFI

In this video, I go through the steps of setting up the RFID RC522 chip with the Raspberry Pi. • Tutorial: https://pimylifeup.com/raspberry-pi-r... • Ultimate Books of Pi: https://pimylifeup.com/ultimate-book-... • The process of getting the circuit wired up correctly is pretty straightforward. There are seven pins that you will need to wire to the Raspberry Pi. • To start this tutorial, you will need a few pieces of equipment. I have listed everything you will need right below. • Raspberry Pi 2, 3, or 4 • Micro SD Card • Power Supply • RC522 RFID Reader • Breadboard • Breadboard Wire • To ensure that you won't run into any issues, you need to make sure your RFID reader is the RC522 model. Other models might work, but I can't guarantee it. • You may also need to solder some header pins to the RFID chip as many of them don't have them already pre-soldered. • The code is pretty straightforward and will take you through the basics of interacting with the chip. Such as reading and writing to the RFID chip. • We go into a lot more depth on both the circuitry and the Python code over at the website. So if you're seeking more information be sure to head over to pimylifeup.com • I hope that this video on the Raspberry Pi RFID RC522 chip helps you with your project. If you have some feedback, then please don't hesitate to leave a comment below.

#############################

New on site