Miter Saw Setup for Accurate Cuts

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=f0EJDfwyNfw

Join the WWGOA community to access a huge library of woodworking instructional videos: https://bit.ly/38h8RoK. • When I walk up to my miter saw and make a cut, I want to know for a fact that the cuts I’m making are accurate. Whether I’m making a 90-degree cut, an angled cut or a beveled cut, I put the same demands on the saw; do what I’m asking you to do. Accurately. • SETTING UP YOUR MITER SAW • Miter saw setup isn’t hard, and it’s something that needs to be done, even to a brand new saw. You’ve got to double check and make sure the saw is making the cuts you need. Instead of trying to use a square between the blade and fence, try this approach for checking your saw. Make a pair of cuts, and compare them to each other. This is a very accurate way to that your miter saw setup is good. Here’s a tip; the wider the boards are that you cut, the more accurate this test will be. • Become a WWGOA member today for instant access to hundreds of woodworking videos: https://bit.ly/38h8RoK. • WORKS FOR BEVELS AND ANGLES • The approach shown here for miter saw setup works whether you’re checking the angle of your miter saw, or the bevel of your miter saw. The only difference is that you’ll use narrower boards to check the bevel. In both cases, make sure that the edge of the board that’s against the fence or down on the table is perfectly straight. • A MUCH USED TOOL… • If you’re like me, you’re using your miter saw all the time. Make sure that you’re using a miter saw correctly and, if you want to know more, but sure to have a close look at http://www.WWGOA.com because we’ve got even more miter saw videos available for you. • MORE INFO • For more information on the Delta Cruzer miter saw visit http://www.deltamachinery.com, or call (800) 223-7278. • Looking for more woodworking instruction? Check out WWGOA premium membership! https://bit.ly/38h8RoK • 🔨 Learn more on the WWGOA website: https://www.wwgoa.com

#############################

New on site