Acer Predator Liquid Metal Upgrade Tutorial

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=fBJFLN8AZMU

I decided to upgrade my son's college laptop on my vacation. He has an Acer Predator Helios 300 and both the thermal temps and fan speeds were very high. • I created a quick tutorial on how to install Liquid Metal on the CPU and GPU and benchmarked the results. The Liquid Metal reduced the temps and fan speeds by 50%. • I have all the tools and materials you will need to install Liquid Metal. • Important Tip: The CPU chip has a very low profile and you can't have any overlapping layers of Scotch 33+ super electrical tape on the board. I made this mistake and the heatsink wouldn't make adequate contact with the CPU. I eventually figured out through trial and error that the overlapping tape was the issue. • WARNING: The Liquid Metal is conductive and will destroy your laptop if it makes contact with any electronic components on your motherboard. Proceed at your own risk. • Tools: • https://www.amazon.com/Precision-Scre... • https://www.amazon.com/Plastic-Openin... • https://www.amazon.com/Scotch-Multi-P... • https://www.amazon.com/Q-tips-Cotton-... • Materials: • Total Cost: $50.55 • https://www.amazon.com/MG-Chemicals-S... • https://www.amazon.com/3M-194NA-200-I... • https://www.amazon.com/Thermal-Grizzl... • https://www.amazon.com/gp/product/B00... • https://www.amazon.com/Swan-Isopropyl... • Optional Tools I used: • https://www.amazon.com/iFixit-Pro-Mag... • https://www.ifixit.com/Store/Tools/Ma...

#############################

New on site