LiTime 12V 300Ah LiFePO4 Lithium Battery

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=fC6bXWXbfT0

Are you interested in the assembly process of the 12V 300Ah #lithium battery? What are the steps? Which materials should we use to build? Please check out our video for more details! • Timestamps • 00:34-Assembly Process(begins) • 00:37-Install signal acquisition wires in sequence • 01:01-Cut the signal line to an appropriate length • 01:09-Soldering signal lines with lead-free solder • 01:20-Check the signal lines in the correct order • 01:34-Put battery pack into the shell and fill EVA cotton • 01:38-Secure BMS with thermally conductive tape • 01:54-Connect B-of BMS to the negative of the battery pack • 01:57-Connect the positive and negative power lines to the cap • 02:31-Plug signal acquisition wires’ port into the interface • 02:38-Test voltage of the battery pack • 02:49-Charging Test • 03:17-Discharging Test • We also produce 12V lithium-ion batteries of different capacities, including 30Ah, 50Ah, 85Ah, 100Ah, 150Ah, 200Ah, and 300Ah. OEM/ODM services are available! Our batteries can match many Inverters of different brands, such as Growatt, Goodwe, Must, Victron, Deye, and so on. • 12V LiFePO4 Batteries Assembly Process: • 12V 50Ah: • 3MIN QuickView!! Assembly and Testing... • Applications: solar-wind power system/ Community and family back-up system/ Tel-com bases/ UPS/ Medical instrument/ RVs/ Electric Boats • Note: The li-ion battery in this video is installed and tested by a professional engineer. Please pay attention to safety and install the battery under professional guidance. • Thanks for watching!!! • If you enjoyed watching the video or find it helpful please hit LIKE SUBSCRIBE QH Technology. • Welcome to visit our website: https://lifepo4-energy.com/ • FB Page: / qhpower • Twitter: / techqh • Quora: https://www.quora.com/profile/QH-Power

#############################

New on site