Specs Telecaster Cherry Burst Custom Deluxe BroadSpectrum Wiring Pushpush DiMarzio Honey Sienna

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=fiQxu2nt_vk

Werner Guitars Website: https://wernerguitars.com/ • Reverb shop: Search: Werner Guitars https://reverb.com/shop/werner-guitars • Ebay shop: Search: WernerGuitars https://www.ebay.com/usr/wernerguitars • Sweetwater Gear Exchange: Search: Werner Guitars https://www.sweetwater.com/used/store... • https://www.facebook.com/profile.php?... • Equipment used: Fender Frontman 25R 2-channel solid state amp through Blue Yeti Mic with no pedals (straight to amp). Amp settings: Treble-8.3, Middle 8.1, Bass 8.7, Reverb-2, Normal Volume-2, Gain-3, Drive Volume-2.2. Mic is on the floor 2 foot in front of the amp. The amp is 2.5 foot off the floor slightly tilted up on an amp stand. Played in large open-space room. • Comes with padded gigbag. All parts were bought new and put in the guitar. General specs below, and full description/specs at the bottom.: • Full-spectrum Resistance 21 ohms to 3 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are partial coil splits modeled after PRS partial coil splits to retain oomph, output, and tone. • You have OPTIONS at Werner Guitars. Just message before the sale if you want anything changed about the guitar. (Pickups, hardware, new wiring/signal chain, etc.) You will be notified if the change can be made, time to complete, cost if any, and pictures provided as appropriate. Get the guitar YOU want. Message today! • Switching Positions as Follows: • 1. Bridge (Resistance 11.98 ohms) • 2. Bridge in parallel with Neck (regular Tele position ) (Resistance 5.39 ohms) • 3. Neck (Resistance 9.62 ohms) • 4. Neck in series with Bridge (Resistance 21.1 ohms) • General Overview • 1/4 Thick Maple Top with High Gloss Polyester Finish on Mahogany body Top Binding • Maple Neck with Gloss Vintage Yellow Finish Rosewood Fretboard • DiMarzio Tone Zone Dual Rail Humbucker Bridge Pickup with Gold Cover 12k. • Gold dual rail humbucker in the neck 10k. • Additional position for both pickups in series (Maximum pickup output) • Humbuckers individually (partial) split • Pure Tone Gold Mono output Jack with multi-contact dual tension grounds dual positive tips for optimal signal, tone lowest possible noise. • Full level, crown, polish and full set-up by a certified luthier • D'Addario Nickel Wound XL 10-46 EXL110-10P • All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed. • Weight of the guitar is 7.4 pounds • Body • 1/4 Thick Maple Top with High Gloss Polyester Finish on Mahogany body Top Binding • Neck • Scale length 25.5 • Maple Neck with Gloss Vintage Yellow Finish Rosewood Fretboard. 21 medium jumbo frets. 9.5 radius (1st fret 0.88 , 12th fret 0.98 ) • Hardware • Gold Wilkinson Bridge with upgraded brass, threaded, compensated saddles and option for top-load • Gold knobs • Gold switch tip • Gold output jack plate • Gold strap pin buttons • Gold Wilkinson EZ-LOK tuners • Gold neck plate • Genuine Fender gold string ferrules • Gold easy-glide string trees • Electronics: • DiMarzio Tone Zone Dual Rail Humbucker Bridge Pickup with Gold Cover 12k (Exact measure 11.98 ohms). • Gold dual rail humbucker in the neck 10k (Exact measure 9.62 ohms). • 500K Potentiometer Push/Pull Split Audio Taper potentiometers • Oak Grigsby 4-way switch • .022uf 400v 5% Tolerance Polyester Radial Guitar Tone Capacitor ECQ-E • Pure Tone Gold Mono output Jack with multi-contact dual tension grounds dual positive tips for optimal signal, tone lowest possible noise. • All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed. • Detailed Switching Positions as Follows: • 1. Bridge (Resistance 11.98 ohms) • with (partial) coil split (tone knob only) 7.90 ohms • with (partial) coil split (tone volume knob) 3.74 ohms • with (partial) coil split (volume knob only) 4.45 ohms • 2. Bridge in parallel with Neck (regular Tele position ) (Resistance 5.39 ohms) • with (partial) coil split (tone knob only) 4.37 ohms • with (partial) coil split (tone volume knob) 3.54 ohms • with (partial) coil split (volume knob only) 4.18 ohms • 3. Neck (Resistance 9.62 ohms) • with (partial) coil split (volume knob only) 6.34 ohms • 4. Neck in series with Bridge (Resistance 21.1 ohms) • with (partial) coil split (tone knob only) 17.22 ohms • with (partial) coil split (tone volume knob) 6.69 ohms • with (partial) coil split (volume knob only) 6.76 ohms • Charted Full range of resistance: • 21.1 ohms • 17.2 ohms • 12.0 ohms • 9.6 ohms • 7.9 ohms • 6.8 ohms • 5.4 ohms • 4.2 ohms • 3.5 ohms

#############################

New on site