12Fan Effects for PC RGB Fans Arduino ESP32 and FastLED

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=fs5oyYVYv6c

Episode: Dave Introduces 12 New Addressable RGB LED Fan Effects for PCs using Arduino and FastLED on the ESP32 as well as planar (up/down, left/right) addressing for multi-fan banks. • Learn Arduino step by step with this FastLED LED Strip effect tutorial for beginners on up. Watch live on the LEDs as Dave works in the editor and debugger, showing you how to craft your own LED strip effects for ARGB (individually addressable RGB) LEDs. • { Please note: there's a small drawing glitch in the code you see in the video, but the code in Github is correct. Basically, you need to call FastLED.clear(); before DrawMarqueeComparison(); but when I commented out the comet, I forget to clear the strip in the video! } • The Heltec ESP32 module used in the video is available at the following link: • https://www.amazon.com/HiLetgo-Displa... • Software Prerequisites: Install the following! • (1) Install the Arduino DESKTOP IDE (not the Web Editor) from https://www.arduino.cc/en/Main/Software • Even though we will not be actively using their IDE, the Arduino software must be installed on the machine even though we'll be using VS Code. Thus, we install the desktop IDE and then never use it. You may wish to launch it and install the ESP32 platform to make it useful for quick scratch projects, etc. • (2) Install Visual Studio Code from • https://code.visualstudio.com/download • Visual Studio Code will be our editor and IDE. • (3) Install the PlatformIO IDE • https://platformio.org/install • PlatformIO IDE is an environment for VSCode that includes the compilers, tools, and everything you need to compile, build, and run projects for many systems. The Arduino ESP32 is but one of those, so we must install the ESP32 platform within PlatformIO: • (4) Within PlatformIO/VSCode, install the Espressif ESP32 Platform for Arduino • With those four, you should be able to go to the PlatformIO home page in VSCode and click on New Project . Enter a project name, select ESP32 Dev Module as the board, and Arduino as the framework. You should be greeted with a working, building, deployable project consisting of a single file, main.cpp • All code is available on github: • https://github.com/davepl/DavesGarage...

#############################

New on site