Ultra Hardware 60857 Gravity Pivot Hinge Set

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=fyM-_bXoWRM

Please find this product at http://absupply.net. • This video is to bring you a closer look at the Ultra Hardware 60857 Gravity Pivot Hinge Set. • There is a small diagram on the back of the package for installation. • First of all you're going to get a bag of screws (gold to match the hardware, some flat head and round head). • You'll have four of each screw. • You will use two round head screws for the top pivot assembly (portion that mounts to the jamb). • You are going to have to leave a bit of a gap with the top pivot assembly when it rests on the gravity pivot, because it moves up as the door swings. • If you do not leave that gap, your bottom portion will not operate correctly. • These pivot pieces a cut to allow the door to self center and close back down. • As a result of that action of it rising, that's where you need to leave that gap. • There are literally no instructions in terms of how to size you doors. • You've got make sure before you attach this to the bottom of the door that as the door gets to 90 degrees, the outside heel isn't going to bury itself into the jamb. • You'll want to leave enough gap for the door to pivot back and forth. • My guess would be leave at least a 1/4 , but it obviously depends how thick your door is. • This package does not say what kind of thickness this is for, but based on what i'm seeing I would say no less than 3/4 . • There is no maximum on the thickness, but the gap from the frame to the edge of the door is going to be directly related to how thick of an item you're fitting in. • Another option you have is to radius over the vertical styles of the door on each side so you've got a rounded edge of detail to the door so that the clearance between the edge of the door and the jamb can be much tighter, close to an 1/8 . • The radius that you're might put on the door is going to be dependent on your door thickness. • If you have any questions on the Ultra Hardware 60857 Gravity Pivot Hinge Set or any other product by Ultra Hardware please feel free to reach out to us.

#############################

New on site