Youtor
Patching Drywall 102 diy diytutorial
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=g03-QfsEleY
Patching Drywall 102 • So you have a bigger hole… don’t worry, I’ve got you covered! • 1. A BIG Hole - grab a 2x4 or 1x4 and place it in the hole on the backside, screw it into the drywall and then place your cut out piece or a new piece of drywall in the whole and screw that in. Use your putty knife and rub joint compound on all the gaps, add drywall tape and then another layer of joint compound. If you are fixing a wall, completely, let it dry, once dry sand it and add another layer of joint compound, let it dry, sand again and either add your wall texture or don’t, then prime and paint. • 2. A Medium Hole - Make a California drywall patch, use new drywall, make tic marks against the hole with an inch border. Cuts out the drywall and score the 1” border, remove the edges of the drywall, leaving the center. Add joint compound to the wall, apply the patch, add another layer of joint compound and repeat the final steps of Step 1. • Refer to Patching Drywall 101 for patching smaller holes and more details on Wall Texture! • Follow for more DIY Tips, Tricks Tutorials! @parisashleyhome • #diy #drywallrepair
#############################
