SCS A Minute with Miranda Testing an ESD Worksurface Mat

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=g_nJ0tVcq6U

Welcome back to A Minute with Miranda. This week we will be covering how to perform the Rtt and Rtg test on an ESD Worksurface Mat. • Before using a worksurface mat in an EPA environment, you need to verify that the mat will meet the ANSI/ESD S20.20 Worksurface Requirements. For both the Rtt and Rtg test the worksurface should test between 1 x 10^6 to less than 1 x 10^9 ohms. The test should be performed in accordance to the ANSI/ESD S4.1 Standards. • SCS worksurface mats meet the ANSI/ESD STM4.1 and ANSI/ESD S20.20 required limit of 1 x 10^6 to less than 1 x 10^9 ohms for Rtt and Rtg and the recommendations of ANSI/ESD S4.1. • View our complete SCS Static Worksurface mat offering: • https://staticcontrol.descoindustries... • • For more information, contact SCS: • E-Mail: [email protected] • Phone: (919) 718-0000 • Website: http://StaticControl.com • ©2019 SCS is a brand of DESCO INDUSTRIES INC

#############################

New on site