Sprinter trailer brake green plug assembly

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=hAjbkKcWZgM

This video describes how to assemble the green brake controller plug on the mercedes benz sprinter 2015-2019 model yrs. • This is for vehicles with the E40 OEM trailer wiring package option... • Here are some instructions and info below- • The green connector inside the driver seat box is for an aftermarket trailer brake control module. • The brake signal from the trailer control module is not directly hardwired to the 7-way trailer tow connector. Instead, the brake signal circuit is routed to the green 4-pin connector (pin 3) and from there a separate wire (pin 4) is routed to the trailer tow 7-way connector. • With the green connector an aftermarket trailer brake control module can be installed, it already has power and ground, as well as the brake signal input and output circuits • Part #s for mating connectors- • A 039 545 35 28 Plug Connector 4-pin • A 035 545 74 28 Flat plug terminal (Male) 1.5 – 2.5 mm² • A 046 545 40 28 Flat plug terminal (Male) 0.75 – 1.0 mm² • -Pin 1 Red/ Yellow 2,5mm²/ max. 18A 12V Positive Fused via F55/6 (max.30A) on Position 30 • -Pin 2 Brown 2,5mm²/ max. 18A Ground (via Seatbase) • -Pin 3 Black/ Red 0.75mm²/ max. 7A Brake Signal from vehicle (via Trailer Control Unit Code E40) OUTPUT ONLY • -Pin 4 Black/ Blue 2,5mm²/ max. 18A Signal to 7-Pin Connector at Trailer Hitch • Check out www.advantageoutfitters.com for your vehicle upfitting needs! or purchase parts now at www.commercialvanshelving.com • video produced by- justrollincamproductions / Scopic USA

#############################

New on site