How to cut Small Fonts and Micro Fonts on Vinyl

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=hIVZGVR2SJE

Find everything you need here: https://colmanandcompany.com/ • Take your vinyl cutting experience to the next level with small micro fonts. This will open a whole new world with small lettering helping you achieve sizes you may have thought impossible before. • Before our setting adjustments we were only able to get down to .5”. After we were able to get down to an 8th of an inch! Imagine the possibilities. • See how quickly we can weed lettering on Triton vinyl here: • Less than 1/4 inch font SUPER FAST HT... • Here’s what we did to make such small letters! • We used our Graphtec CE6000-60 Plus cutter and paired it with our Triton Silver vinyl for maximum precision results. It was also important to replace the blade and cutting strip because even .5mm would make a huge difference – so it needed to be perfect. • Then we made a few condition changes on the cutter such as: • Speed – set to 15 (Reasonable speed for high detail). • Force - set to 21 (to be firm but not too much) • Acceleration - set to 2 (since we are going so slow anyway) • Tangential Emulation - set to 2 (which is recommended for overcut at start and end.) • Overcut - before AND after at .04”. (Makes sure all the precise cuts are thorough) • Finally, we placed the Triton vinyl in the cutter and sent the letting on over. If you’ve worked with vinyl before you know that using the highest quality supplies will truly make a difference in the quality and life of your finished product. • • Check out the difference between Opaque and Glitter vinyl: • Trition HTV | What’s the difference b... • • Look at the dramatic differences in sizes we were able to cut using these micro setting and adjustments. • If you have any questions on the Triton Vinyl supplies or the Graphtec CE6000-60 cutter equipment we used, make sure to give us a call at 800-891-1094! • Check out how to start your own tshirt business with vinyl here: • Video

#############################

New on site