Lownoise Vertical MW BCB DXing Antennas

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=hSwkM9aaGNU

This is a video showing the three low-noise vertical antennas I use for MW and LW DX'ing on my small suburban lot. They are based on designs by Dallas Lankford and others and adapted to the conditions of my QTH. I phase these antennas when DX'ing MW using a Quantum Phaser to null out noise or strong local/regional stations. They are also all quite stealthy and have very low to no visibility. • Toroid Construction Articles (See Impedance Transformsrs/John Bryant): http://www.dxing.info/equipment/ • Corrections: 1) I mention in the video that the telescoping fiberglass mast sections are from Universal Radio. They are actually from DX Engineering and come in various diameters. 2) Also the diagram at the beginning indicates antenna lengths of 27 or 35 ft . It should say 27 or 30 ft . The number 35 is the approximate total height for the 30 ft antenna and wire to ground rod. 3) I mention I use a #2 solid copper grounding wire. I actually use a #10 solid copper grounding wire.

#############################

New on site