PWM on the Raspberry Pi Pico with MicroPython

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=hqudYm-a_aU

In this video we will define what a Pulse Width Modulation or PWM signal is, build a circuit that controls the output of an LED via a potentiometer, and we will write the code to produce a varying PWM signal mapped to the ADC’s integer output. • 00:00 Intro • 00:33 PWM Background Information • 01:52 Pico Hardware Description • 02:32 PWM Groups • 02:40 Circuit Build • 03:19 Programming • 03:44 Choosing 1000 Hz • 04:29 Recap • The parts you will need to follow along with this video are: • 1x Raspberry Pi Pico • 1x Micro USB Cable • 1x Breadboard • 1x 10k Potentiometer • 6x Jumper Wires • 1x LED • 1x 150 Ohm Resistor • Hardware Links: • Elegoo Electronics Kit: https://amzn.to/3aKWJA7 • Breadboard: https://amzn.to/2Npu9f5 • https://www.adafruit.com • https://www.sparkfun.com • Helpful Links: • https://www.raspberrypi.org/products/... • https://www.raspberrypi.org/documenta... • https://micropython.org/download/rp2-... • https://thonny.org/

#############################

New on site