DIY Extreme Range WiFi USB Antenna in 5 Minutes

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=i5EvLgUJfhQ

Software used to test the Cantenna: inSSIDer, available for download here: http://www.metageek.net/products/inss... • Website that will calculate all measurements you will use during construction: • http://www.turnpoint.net/wireless/can... • Can diameter: approximately 3.5 inches, measured from the open end of the can. • This video is the first follow up video to my previous Wok Fy video. This antenna is several times more effective and just as easy to build. I chose to use a USB adapter instead of an SMA type connection because this solution is far easier for most people to implement (everyone has a USB port nowadays). • If you are in a hurry, you can skip to the end and see the results. Conclusion: assuming that you make the correct calculations and measurements, this antenna is a great solution for your crappy WiFi reception. I hope you enjoy the video, please leave feedback and rate.

#############################

New on site