Youtor
Mastering Speed in AutoCAD Lightning Fast drawing Creation
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=iAvDH5xDW24
Hai friends. • Welcome to UniquE CAD DesigN. • Topic • Mastering Speed in AutoCAD : Lightning-Fast Line Creation • Are you looking to boost your productivity in AutoCAD and create lines faster? • In this video, I will share some valuable tips to help you speed up your drawing process. • Let's get started! • Usually, you will find line command from home tab, draw panel. • Use Shortcut Keys. • Always use shortcut keys to Speed up your workflow. For line command L is short key. • After select command press F12 to enable Dynamic Input mode, which brings all input boxes near your cursor for quick access. • Efficient Point Input. • When creating lines, you can either specify points directly on the screen or enter the X and Y values to specify the first point of the line. • Use the Tab key on your keyboard to easily switch between input boxes. • Fill the box Press enter to finish the input. • move cursor to specify the direction of line, • specify the length of line press entre or space to finish the line. • if you press one more enter it will exit the command. if you want recall line command press enter again, press on more enter it will take previous line end point as the first point of new line. • To draw line in angle, press F10 it will turn on polar tracking mode. • move cursor upside, it will start measuring angle in anti clock wise direction. • move cursor downside, it will start measuring angle in clock wise direction. • length of line is 42 press tab to specify the angle of line. • hear angle of line is 180-144 = 36. • press F8 to turn on ortho mode. • quickly I will finish all the line. • Quick Exit. • Once you finish sketching a line, press Enter or Esc or “Space” to exit the command. • Modify drawing with Pick Points. • After sketching, you can use pick points to modify the parameters of the lines. • select the drawing - end midpoint of line will be highlighted. • select midpoint move cursor to move the line. • select end point move cursor to increase the length of line. • Quick Properties Panel. • make use of Quick Properties panel to modify the property of line. • Press Ctrl+Shift+P to enable Quick Properties panel and adjust the properties of selected objects effortlessly. • You can Customize Quick Properties panel by adding or removing frequently used properties. • This allows you to have quick access to the most frequently used properties in the list. • Remember, you can change the properties of an any object at any time by selecting it and making adjustments in the Quick Properties panel. • Practice makes perfect, so keep using these techniques to master speed in AutoCAD. • I hope this information is use full for you. please like the video subscribe the channel for more use full video on AutoCAD. • • hanks Regards. • Harish M • UniquE CAD DesigN • Email : [email protected] • #autocad
#############################
