Chrysler 200 20112014 New Battery Install

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=iCutcihYpGU

Learn how to install a new battery in a Chrysler 200. We’ll show you how to replace/change/remove with simple tips and tricks to help get you started! • Tool List: 13mm wrench, 10mm wrench, 7mm wrench, Push Pin removal tool (https://a.co/d/0WWKXFZ), car jack stand • The 12 volt battery in this 2013 Chrysler 200 is located in the fender well. Although this video may provide you with the basic procedures, we recommend that you check with the vehicle manufacture's step by step procedures found in service/repair manuals for the vehicle you are working on. • Even if your vehicle did not come with an AGM battery, you can upgrade to an AGM battery for up to 2x the life. AGM can be found at most retail outlets. You can learn more about AGM here: https://www.autobatteries.com/en-us/b... • The use of a memory saving procedure will keep the memory alive on the vehicle's computer during the battery replacement procedure. Referring to our Memory Saving video will provide you with various memory saving procedures that can be used according to vehicle manufacturer's requirements. • Vehicle Memory Saving - The Battery Shop • Some late model vehicles must have the 12 volt battery registered with the vehicle's Battery Control Module or Computer after replacement. See these videos on Battery registration and coding for more details on the procedures at • Battery Registration with a Scan Tool... • Battery Registration Coding - The B... • Always wear safety glasses and gloves when working with or near batteries.

#############################

New on site