DEUTSCH DT Series Connector Instructions

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=jE712DGw8CY

This video provides step-by-step instructions on how to properly insert and remove contacts when using TE Connectivity's DEUTSCH DT Series Connectors. Visit http://www.te.com/ict for more information. • DT Series Contact Insertion • Step 1: Grasp crimped contact approximately one inch behind the contact barrel. • Step 2: Hold connector with rear grommet facing you. • Step 3: Push contact straight into connector grommet until a click is felt. A slight tug will confirm that it is properly locked in place. • Step 4: Once all contacts are in place, insert the wedgelock into the housing. • DT Series Contact Removal • Step 1: Remove the wedgelock using a DT-RT1 removal tool, a screwdriver, a hooked tool or a pair of needle nose pliers. • Step 2: To remove the contacts, gently pull wire backwards, while at the same time releasing the locking finger by moving it away from the contact with a screwdriver. • Step 3: Hold the rear seal in place, as removing the contact will displace the seal

#############################

New on site