How to Cut Wood Flooring Difficult Laminate Cuts

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=jRBIc8f7I2U

In this DIY how to cut wood flooring video, we'll show you over a dozen difficult cuts and how to cut wood flooring around doors, cutting wood floors, and how to end cut wood floors. We also cover how to cut wood flooring at an angle for those times you come across an angled wall. • How to cut laminate • We'll show you how to make the most difficult laminate cuts. Cutting wood floors at an angle is tricky if you fail to get all the dimensions right. But you will learn the fine art of cutting laminate and the correct way how to cut laminate. • Tools in this video: • ✅ DEWALT DW715 Chop Saw: https://amzn.to/2RchGLw • Ridgid R4510 Portable Table Saw with Stand: https://amzn.to/2BMY5rJ • RIDGID 50323 Wet/Dry 12-Gallon Shop Vacuum: https://amzn.to/2Sdn3al • Roberts Electric Door Jamb Saw used in this video for laminate flooring installation: https://amzn.to/2QOaeqI • Rockwell RK5151K 4.2 Amp Sonicrafter we used in this video to cut door jams for hardwood flooring installation: https://amzn.to/2CrWYyX • ✅ SUBSCRIBE: • For more useful DIY home remodeling tips, tricks, and solutions to engineering disasters subscribe here: https://bit.ly/2vj06cB • ✅ WATCH: How to Install Laminate Flooring, Hardwood Floors [Master Class] • • How to Install Laminate Floor DIY - M... • ✅ WATCH: How to Transition Wood Floors to Curved Tile Floor • • How to Transition Laminate Wood Floor... • ✅ WATCH: How to Transition Wood Floors to Carpet Floors, Uneven Floor • Carpet to Wood Floor Transition, Lami... • ✅ WATCH: How to Transition Wood floors to Sliding Glass Doors and Tile • How to Transition Wood Floors To Slid... • ✅ WATCH: How to Make A Transition Between Floor Heights From Tile And Wood • • How To Transition Different Tile/Wood... • Cutting wood floors and cutting wood trim can be a challenge sometimes and you must be patient and focused. All these techniques apply to cutting wood laminate floors as well. • You don't want to cut wood flooring flush to walls • When you cut wood flooring, make sure you don't cut wood flush to wall, most manufacturers want about 1/4 to 5/16 space between the cut wood flooring plank and the wall to allow for expansion of the wood floors. We'll also show you in this DIY video how to cut wood flooring around doors, which are the most difficult laminate cuts to make. Cutting laminate will be simple by time you are finished. • How to cut wood flooring at an angle • This comes up a lot when you have to terminate your laminate wood flooring plank at an angled wall, you want to cut wood flush to wall. The solution to your end cut wood floor is easy, you turn the table of your chop saw to 45 degrees, and cut. But it's not always that simple. • More tips on how to cut wood flooring at an angle • You'll sometimes find when you rough cut wood floor planks, that maybe the angle was closer to 50 degrees, or sometimes you should have cut that wood flooring plank at an angle of 40 degrees. Cutting wood floors at an angle is not that hard, but you do need to be accurate when cutting laminate wood floors at an angle to get the angle of the wall correct. To cut wood flooring at an angle, you may have to practice on a few defect pieces, to get the hang of installing hardwood floors. • How to cut laminate floors • The cuts we show you here will give you inspiration when you cut laminate flooring around door jambs. This video also shows you how to cut laminate flooring with table saws, and chop saws, and the tools you need to cut laminate flooring lengthwise with our Rigid table saw. This is called a rip cut, when you cut laminate flooring lengthwise down the floor plank. • Cut laminate flooring with table saw for better accuracy • You will most certainly need to have a table saw on hand when installing laminate flooring to cut laminate flooring lengthwise down the length of the laminate floor planks. This is known as rippping wood planks, and is useful to cut wood flush to wall on that last row of hardwood floor planks. We also use the table saw to cut laminate flooring around door jamb. • Cutting laminate is tricky, but we'll make it easier for you in this master class, we'll show you how to cut laminate floor quickly. Before long, you'll be proficient in how to cut laminate flooring with table saw. You'll be able to cut laminate flooring lengthwise in no time. • So you'll sometimes have to make a second cut to see which is better, because angled walls are not always perfect 45 degree angles. So we'll show you here how to cut wood flooring at an angle. • Congratulations, you at=re now an expert at cutting wood floors, and now you can teach others how to cut wood flooring, and please make sure you do not cut wood flush to wall, you must leave expansion space for the wood flooring instillation to breath.

#############################

New on site