ACOM 1000 Tube Replacement Extreme Caution

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=kAJf0whitTk

Do not attempt until you have read the fulI instructions. I put this off because I thought it would be difficult, but it is not as I found out. I got an error message on my ACOM 1000 a while back and with the help of their technical support, we determined it was the tube that was at fault. In this video I'll show you how I removed the tube and most importantly, set the idling current. The full article is on my website https://www.k0pir.us/acom-1000-tube-r... • My personal rule is to never open an amp up until it has set unplugged from the power mains for at least 30 minutes. There are further instructions regarding this in the Full Instructions on my website. • ○○○ LINKS ○○○ • For parts and equipment I use, please visit my website ► http://www.K0PIR.us • Follow my travels on my Instagram feed ► / • My Twitter feed ► / k0pir • Facebook page ► / hamradiok0pi. . • Visit my QRZ page ► https://www.qrz.com/db/K0PIR • • Thanks for watching! Please like, subscribe and share! • Best 73 – Rich, K0PIR • DISCLAIMER: This description may contain affiliate links, which means that if you click on one of the product links, I may receive a small commission. This helps support the channel. ... • #hamradio #amateurradio #k0pir

#############################

New on site